ROOF SHADE SAIL ANCHOR BRACKET (ZINC PLATED) with BLACK WEATHER SEAL

ROOF SHADE SAIL ANCHOR & SEAL

A better way of attaching Shade Sails to buildings

Shade Sails are being erected all over the World

Their popularity is increasing as they offer many forms of protection from inclement weather; over barbecues, play areas, outdoor pools and spas.

The Roof Extenda Shade Sail Anchor is designed to solve problems and provide a better & safer means of a ttaching Shade Sails to buildings.

The Shade Sail Anchor is bolted directly to the rafter and wall top plate of the existing building, giving a structually sound fixing method, ensuring the strongest means of support.

This innovative design, greatly reduces the time and effort compared to traditional Shade Sail fixings

Four Installation Steps

• Remove roofing tiles or lift roof sheet to achieve an opening to fit the Roof Extenda Shade Sail Anchor Bracket.

• Bolt the section with steel rod and the backing plate to the rafter using 4 x M12 bolts. Secure both brackets to the top plate with 2-M10 coach screws to each bracket.

• Replace roof tiles or roof sheet, cutting a hole to allow the loop & rod to penetrate the roof.

• Slide Weather Seal over the loop and down the shaft. Ensuring roofing are is clean and dry, mark the position of the Weather Seal on the roofing. Apply clear neutral cure silicone to the area marked, press and shape the Weather Seal into the roof profile, finish with a bead of silicone to all edges of the Weather Seal to complete the fitting.