DESIGN PINE PRIMED SQUARE EDGED H3 30 x 11 x 5400mm [P]
![DESIGN PINE PRIMED SQUARE EDGED H3 30 x 11 x 5400mm [P]](https://agnew-cdn.n2erp.co.nz/cdn/images/products/large/designpine-1_636943886193759765.jpg)
DESIGN PINE DAR H3 SQ. EDGE 30 x 11 x 5400mm
THE TIMBER
Design Pine is manufactured from environmentally friendly sustainable plantation grown Radiata pine. Through the manufacturing process all the natural features and defects which may induce the timber to bow or twist are removed. The pine shook is then finger jointed back together to produce a clear defect free straight board. The removal of the all visible natural defects reduces the risk of resin bleed and other impurities coming to the surface for the life of the product. Lamination may also be used to increase the product range by creating larger Design Pine profiles e.g. 185x185 posts or 320x65 beams. The lamination also assists in the structural and dimensional integrity as the finished products are longer, stronger and straighter than conventional solid Radiata boards.
THE PRIMER SYSTEM
Design Pine's revolutionary blue primer has greater flexibility and UV resistance to give a more durable undercoat for the life of the painting system. The technology in the Design Pine primer was a world first the time of release as it includes a moisture management system to slow moisture ingress and durability second to none as it can remain exposed on a building site for 12 weeks before it will start to deteriorate, thus aiding to the dimensional stability long term performance of the product range. Developed over three years, the Design Pine primer is specifically designed to coat solvent-based timber preservation systems. The result is a genuine primer coating that is ready to directly topcoat with any quality exterior paint.
All blue primer systems are not the same - ask for Design Pine by name.
WHERE IS DESIGN PINE BEST USED?
Design Pine comes in a wide range of profiles, which can be used in all above ground applications. Some examples include:
- Pergolas
- Carport
- Verandas
- Handrails
- Weather Boards
- Barge Boards
- Fascia
- Privacy Screens
THE PRESERVATIVE
All products in the Design Pine range utilise an innovative organic preservation system and are rated to hazard level 3 (H3) for all above ground applications. The preservation system is free of heavy metal allowing Design Pine be used in high contact areas as specified by the APVMA. Waxes and resin are used in the preservative to aid dimensional stability over the life of the product in application by they reduce the rate of moisture uptake into the timber.
This proven preservation system increases durability, resists rot and decay, increases resistance to insect attack and is covered by a limited 25-year durability guarantee.
PAINTING
Timber is a natural material and thus the use of light coloured topcoats is recommended. Dark colours tend increase the boards temperature and may lead to problems such as surface checking and resin bleeds. An optimum finish is obtained with two topcoats of quality exterior paints within 12 weeks of installation.
First remove all dirt etc, and prime all bare areas with Design Pine exterior primer. If the primer surface is exposed to weather for an extended period without painting (3+ months), the surface may become chalky. If this happens sanding and repriming is required. Painted Design Pine creates a beautiful glossy finish.
DISPOSAL
While Design Pine is treated, it remains a non-hazardous waste. Thus, private and commercial users can dispose of cuts through normal waste refuse. Design Pine timber off cuts should not be burnt as domestic fuel nor supplied for mulching or animal bedding.
Volume (M3) | |
Height (M) | |
Width (M) | |
Depth (M) |
Click here to view the full Shipping Details and Returns Policy.