HARDIE™ TOP COAT
DESCRIPTION For a seamless, professional, water resistant finish over fibre cement joints, James Hardie™ Top Coat is the only logical choice. James Hardie Top Coat is a smooth polymer enhanced finishing compound to be used over James Hardie™ Base Coat. It is premixed to ensure ease of use.
USES James Hardie Top Coat can be used with Villaboard® Lining on: ¦ Internal walls and ceilings. ¦ Sheltered exterior applications including eaves and soffits. James Hardie Top Coat has not been approved for use with HardiTex® Base Sheet, Monotek Sheet® or non-James Hardie products.
APPLICATION
Set Joints ¦ Using a 250mm trowel, apply a coat of James Hardie Top Coat 280mm wide centrally over the joint. Note: If it is a butt joint, apply this coat approximately 500mm wide. ¦ Trowel the James Hardie Top Coat smooth and flat ensuring that the edges are well feathered. ¦ Allow to dry completely.
Internal Corners ¦ Apply a thin finishing coat of James Hardie Top Coat over the James Hardie Base Coat smoothing out with a corner tool. ¦ Allow to dry completely.
Fastener Heads ¦ Apply a finishing coat of James Hardie Top Coat to fastener heads, fully covering any James Hardie Base Coat. Feather out the edges. ¦ Allow to dry completely.
Click here to view the full Shipping Details and Returns Policy.
